Liquid for print penetration and oil absorption tests; W24

Nylon cap for the IGT ink pipette, with an opening through which the ink can be forced out.
The plunger is a plastic rod, that fits accurately into the nozzle and can be moved.

IGT Pick test oil, low viscosity, 17,5 Pa.s, tube 70 ml

The substrate carrier consists of a plate with a rubber blanket strip on it. The substrate is mounted with the side to be printed upwards, with a piece of tape on the blanket of the carrier.

From time to time the IGT rubber blanket discs need their rubber blanket to be replaced.

For some tests a rubber packing is required to cover the sector. This depends on the test and used printing disc.

The substrate is located on a substrate carrier that is placed on the substrate guide between the printing form and the impression cylinder.